Contribute to Quarkus documentation
Contribute to the documentation by using the recommended diataxis content types, steps, workflow, and style guidance to ensure the content successfully renders on the Quarkus website portal.
Quarkus docs use AsciiDoc markup.
Pré-requisitos
-
You have an editor or IDE that provides syntax highlighting and previews for AsciiDoc, either natively or with a plugin.
-
You have reviewed the following Quarkus contributor resources:
-
The Documentation section of the Quarkus "Contributing" guide.
-
The Quarkus style and content guidelines for the required syntax, preferred style, and other conventions.
-
-
You have the AsciiDoc syntax reference nearby.
Locate the source files for Quarkus docs
-
AsciiDoc files are in the
src/main/asciidocdirectory within thedocsmodule of the Quarkus GitHub repository. -
The Quarkus doc templates are located in the
src/main/asciidoc/_templatesdirectory within thedocsmodule of the Quarkus GitHub repository. -
Configuration documentation is generated from JavaDoc comments in Java source files.
-
Java, YAML, and other source files can also be referenced by AsciiDoc files.
-
The Quarkus documentation menu page, also known as the doc index page, is sourced in the quarkusio.github.io repository.
Create Quarkus content in AsciiDoc
To ensure that your content shows up correctly on the Quarkus documentation home page, use the following steps:
-
Decide on a Diataxis content type that best fits the content that you are contributing.
To help you decide, see the content type descriptions in Titles and headings on the "About Quarkus documentation" page. -
Go to the
src/main/asciidoc/_templatesdirectory, and make a copy of the relevant template for the content type you have chosen. Be sure to:-
Use the filename syntax of`<category>-<titlekeyword>-<titlekeyword>.adoc`. For example,
security-basic-authentication.adoc. -
Include the diataxis type (concept, howto, reference, tutorial) in the file name if it makes sense to do so. For example,
telemetry-micrometer.adocis a reference, andtelemetry-micrometer-tutorial.adocis a tutorial. -
Save the file to the
docs/src/main/asciidocfolder in thequarkusrepository.
-
-
Set the minimum required header information to ensure that the content renders correctly in the website portal and on the documentation home page, as outlined in the following example:
[id="security-basic-authentication"] (1) = Secure a Quarkus application with basic authentication (2) include::_attributes.adoc[] (3) :diataxis-type: howto (4) :categories: security,web (5) (6)1 Set the idvalue to be the same as the file name but without the extension.2 For information about how to create a good title for each content type, see Titles and headings on the "Quarkus style and content guidelines" page. 3 The _attributes.adocinclude is required to ensure that attributes get resolved and the table of contents is generated.4 Specify the diataxis type: concept,howto,reference, ortutorial.5 Set at least one category to ensure that the content is findable on the Quarkus documentation home page. For a list of Quarkus categories, see Document attributes and variables on the "Quarkus style and content guidelines" page. 6 Insert a blank line after all document attributes and before the abstract. Ensure there are no blank lines between the document id and title, the attribute include (
include::_attributes.adoc[]) and the declaration of other document attributes(:attribute:). -
Add an abstract that describes the purpose of the guide.
The first sentence of the abstract must explain the value and some benefit of the content in less than 27 words because this automatically displays on the Quarkus guides homepage. There must also be a line break before and after the abstract.
For more information about the minimum header requirements, see Document structure on the "Quarkus style and content guidelines" page.
Add a prerequisites section
For how-to and tutorial topics, include a prerequisites section just after the abstract. Declaring prerequisites clarifies the starting place for both how-to and tutorial content. Include them even though they might seem obvious to knowledgeable users.
.Prerequisites (1)
:prerequisites-time: 30 minutes (2)
include::{includes}/prerequisites.adoc[] (3)
* <an additional prerequisite> (4)| 1 | Section heading for the prerequisites |
| 2 | Optional: An attribute that modifies the prerequisites |
| 3 | An include statement for the prerequisites.adoc file |
| 4 | Optional: An additional prerequisite not covered by the attributes |
By default, include::./_includes/prerequisites.adoc[] inserts the following asciidoc:
To complete this guide, you need:
* Roughly 15 minutes
* An IDE
* JDK 17+ installed with `JAVA_HOME` configured appropriately
* Apache Maven {maven-version}
* Optionally the xref:cli-tooling.adoc[Quarkus CLI] if you want to use it
* Optionally Mandrel or GraalVM installed and xref:building-native-image.adoc#configuring-graalvm[configured appropriately] if you want to build a native executable (or Docker if you use a native container build)Optionally, you can add, remove, or modify the default prerequisites by inserting the following attributes on the line before the include::./_includes/prerequisites.adoc[] macro.
-
{prerequisites-time}: <number of minutes>overrides the default value of 15 minutes. For example,{prerequisites-time}: 30adds* Roughly 30 minutes. -
{prerequisites-no-maven}removes* Apache Maven <maven version>. -
{prerequisites-docker}adds* A working container runtime (Docker or Podman). -
{prerequisites-docker-compose}addsDocker and Docker Compose or Podman, and Docker Compose. -
{prerequisites-no-cli}removes* Optionally the Quarkus CLI if you want to use it. -
{prerequisites-no-graalvm}or{prerequisites-graalvm-mandatory}remove* Optionally Mandrel or GraalVM installed and configured appropriately if you want to build a native executable (or Docker if you use a native container build). -
{prerequisites-graalvm-mandatory}adds* Mandrel or GraalVM installed and configured appropriately.
For more information about these attributes, inspect the content of the docs/src/main/asciidoc/_includes/prerequisites.adoc file.
Retire and redirect an existing Quarkus AsciiDoc source file
As content evolves, you might want to restructure an existing piece of Quarkus content into one or more content types and retire the existing AsciiDoc source file.
If you are retiring or renaming a published Quarkus AsciiDoc source file, ensure that the restructure does not break existing bookmarks and links to the original content. Configure a URL redirect in the Quarkus.io Website GitHub repository by using the following steps:
-
Switch to the
quarkusio/quarkusio.github.iorepository, and open the_redirects/guidesfolder. -
Create a redirection file in Markdown format with a filename that matches the original AsciiDoc source filename that you want to retire.
-
Add the following contents to the Markdown redirection file:
--- permalink: /guides/<original_asciidoc_filename>/index.html (1) newUrl: /guides/<new_asciidoc_filename> (2) ---Where:
1 The name of the original AsciiDoc source file that you are retiring, without the .adocfile extension.2 The name of the AsciiDoc source file that you want to redirect to, without the .adocfile extension.
| Name of original AsciiDoc source file | Name of target file to redirect to | Redirection file | Example pull request |
|---|---|---|---|
|
|
Use anchors to cross-reference in-file and cross-file content
An anchor, also called an ID, can be defined almost anywhere in the document, including on a section title, discrete heading, paragraph, image, delimited block, inline phrase, etc.
The callout functions for these anchors vary based on whether you call a local ID or the ID from another file, but the anchored ID creation remains the same.
Create an anchored ID
To create an ID for a new file or a section to which you want to refer, insert the anchor ID as follows:
-
Use lower-case characters.
-
Separate each word with a dash character.
-
Enclose the ID in double square brackets.
In this section, we will use an anchor created above the level-2 heading for demonstration purposes.
[[title-heading]]
== Title headingCall an anchored ID in the same file
To call an anchor created in the same file, insert the anchored ID in a <<>> xref macro.
<<title-heading>>This macro creates an URL with a name automatically sourced from the anchored heading, section, or table.
Do not use the <<>> format with the verbatim heading or section description, such as
<<Title heading>>.
|
When you want to specify a non-default caption for your URL, specify the anchored ID and desired name separated by , without white space.
<<title-heading,Title heading description that fits the context of your content>>Call an anchored ID from a different file
To call an anchor created in a different file, insert the anchor to an xref macro and specify the full name of the hosting file and the desired anchored ID.
xref:<other-file-name>.adoc#title-heading[Title heading]Breaking this example apart, we are using the xref macro to refer to another file (xref:<name-of-the-file>.adoc[Human-readable label]) and inserting the anchor ID for the target section (#title-heading) just after the file name.
For more guidelines on writing cross-references, including the recommended path attributes, see Cross-references.
Preview and build Quarkus documentation
Before you submit a pull request, preview the HTML output of your AsciiDoc source by using one of the following build methods:
-
For minor documentation changes, you can use the AsciiDoc syntax highlighting and preview provided by your IDE.
-
For significant changes or updates to generated configuration documentation, build the
docsmodule locally and run the Vale linter as outlined in the following sections.
Build the docs module locally
O seguinte comando irá construir todos os módulos no repositório do Quarkus (exceto módulos de teste) e instalá-los em seu repositório maven local com a versão '999-SNAPSHOT':
./mvnw -DquicklyDocsRunning -DquicklyDocs produces:
-
Generated AsciiDoc (
adocfiles) describing configuration properties in thetarget/asciidoc/generated/config/directory. -
AsciiDoc output (
htmlfiles) in thedocs/target/generated-docs/directory. -
YAML files containing metadata for all documents individually (
docs/target/indexByFile.yaml) and grouped by document type (target/indexByType.yaml). -
YAML files that list metadata errors by file (
docs/target/errorsByFile.yaml) and by error type (docs/target/errorsByType.yaml)
Review the resulting output and fix any issues before you submit your changes in a PR for review.
As you make changes, you can rebuild the docs module specifically to update the generated HTML:
./mvnw -f docs clean install|
When updating extension configuration:
|
Lint documentation changes with Vale
Our builds use Vale to check grammar, style, and word usage in the English versions of our documents. We created our own Vale style ruleset to ensure that content aligns with the preferred Quarkus style guidelines.
|
Containerized Vale
This approach requires a working container runtime (Docker or Podman).
The docs module has a JUnit 5 test that will run the Vale linter in a container (using Testcontainers).
It verifies both Quarkus document metadata and Vale style rules.
Run the test in one of the following ways:
./mvnw -f docs test -Dvale -DvaleLevel=suggestion (1)
./mvnw -f docs test -Dvale=git -DvaleLevel=warning (2)
./mvnw -f docs test -Dvale='doc-.*' -DvaleLevel=error (3)| 1 | Run the Vale linter for all *.adoc files in the src/main/asciidoc directory of the docs module.
Include suggestions, warnings, and errors in the results. |
| 2 | Run the Vale linter for any modified *.adoc files in the docs module (git status).
Include warnings and errors in the results. |
| 3 | Run the Vale linter for *.adoc files that match the regular expression (Java Pattern syntax).
Include errors in the results. |
Use the Vale CLI
If you install the Vale CLI, you must specify the configuration file and the directory or list of files to scan:
# Run from the Quarkus project root
vale --config=docs/.vale.ini --minAlertLevel=warning docs/src/main/asciidoc
# Run from within the docs directory
vale --minAlertLevel=warning src/main/asciidocFor more information, see the Vale CLI Manual.
Vale IDE plugins
Vale IDE integrations require the Vale CLI to be installed.
Each IDE integration has its own configuration requirements. The Visual Studio Code IDE extension, for example, requires a definition of the Vale CLI path:
"vale.valeCLI.path": "/path/to/vale"Creating pull requests for doc updates
Submit your proposed changes to the core Quarkus docs by creating a pull request against the main branch of the Quarkus repository from your own repository fork.
Reviews for code and documentation have different (but overlapping) participants. To simplify collaborative review, either isolate changes to docs in separate PRs or ensure that a PR has a single focused purpose. For example:
-
Create a single PR that adds a configuration option for an extension and updates related materials (how-to, reference) to explain the change.
-
Create a single PR for related changes to a group of documents; some examples: Correcting the usage of a term, correcting a recurring error, or moving common content into a shared file.
-
If there are extensive code changes and documentation changes, create a separate PR for the documentation changes and include the relationship in the issue description.
GitHub automatically adds the area/documentation label to pull requests that contain changes to documentation files.
For more information about managing pull requests, see Information for Quarkus Committers.
Automatic style checking on the PR diff
The Vale linter job automatically runs when a PR is created or updated. If your content updates do not align with the key style or terminology preferences of the Quarkus community, the updated line on the diff tab gets annotated with the Vale recommendations. To ensure that your content gets approved, fix the linter errors, warnings, and suggestions.
We welcome your feedback on the Quarkus documentation style guidelines.
If you disagree with the Vale results, add the yellow PR label needs-vale-rule-tweak.
Previewing doc changes on the Quarkus website
After your PR is merged to main and the branch is synchronized with the Quarkus.io website repository, you can preview the resulting build output on the Main branch (SNAPSHOT) documentation page of the Quarkus site.
|
The |
