Load Shedding reference guide
|
Essa tecnologia é considerada experimental. In experimental mode, early feedback is requested to mature the idea. There is no guarantee of stability nor long term presence in the platform until the solution matures. Feedback is welcome on our mailing list or as issues in our GitHub issue tracker. Para obter uma lista completa de possíveis status, consulte nosso FAQ. |
Load shedding is the practice of detecting service overload and rejecting requests.
In Quarkus, the quarkus-load-shedding extension provides a load shedding mechanism.
1. Use the Load Shedding extension
To use the load shedding extension, you need to add the io.quarkus:quarkus-load-shedding extension to your project:
<dependency>
<groupId>io.quarkus</groupId>
<artifactId>quarkus-load-shedding</artifactId>
</dependency>implementation("io.quarkus:quarkus-load-shedding")No configuration is required, though the possible configuration options are described below.
2. The load shedding algorithm
The load shedding algorithm has 2 parts:
-
overload detection
-
priority load shedding (optional)
2.1. Overload detection
To detect whether the current service is overloaded, an adaptation of TCP Vegas is used.
The algorithm starts with 100 allowed concurrent requests. For each request, it compares the number of current requests with the allowed limit and if the limit is exceeded, an overload situation is signalled.
If the limit is not exceeded, or if priority load shedding determines that the request should not be rejected (see below), the request is allowed. When it finishes, its duration is compared with the lowest duration seen so far to estimate a queue size. If the queue size is lower than alpha, the current limit is increased, but only up to a given maximum, by default 1000. If the queue size is greater than beta, the current limit is decreased. Otherwise, the current limit is kept intact.
Alpha and beta are computed by multiplying the configurable constants with a base 10 logarithm of the current limit.
After some number of requests, which can be modified by configuring the probe factor, the lowest duration seen is reset to the last seen duration of a request.
2.2. Priority load shedding
If an overload situation is signalled, priority load shedding is invoked.
By default, priority load shedding is enabled, which means a request is only rejected if the current CPU load is high enough. To determine whether a request should be rejected, 2 attributes are considered:
-
request priority
-
request cohort
There are 5 statically defined priorities and 128 cohorts, which amounts to 640 request groups in total.
After both priority and cohort are assigned to a request, a request group number is computed: group = priority * num_cohorts + cohort.
Then, the group number is compared to a simple cubic function of current CPU load, where load is a number between 0 and 1: num_groups * (1 - load^3).
If the group number is higher, the request is rejected, otherwise it is allowed even in an overload situation.
If priority load shedding is disabled, all requests are rejected in an overload situation.
2.2.1. Customizing request priority
Priority is assigned by a io.quarkus.load.shedding.RequestPrioritizer.
There is 5 statically defined priorities in the io.quarkus.load.shedding.RequestPriority enum: CRITICAL, IMPORTANT, NORMAL, BACKGROUND and DEGRADED.
By default, if no request prioritizer applies, the priority is assumed to be NORMAL.
There is one default prioritizer which assigns the priority of CRITICAL to requests to the non-application endpoints.
It declares no @Priority.
It is possible to define custom implementations of the RequestPrioritizer interface.
The implementations must be CDI beans, otherwise they are ignored.
The CDI rules of typesafe resolution must be followed.
That is, if multiple implementations exist with a different @Priority value and some of them are @Alternatives, only the alternatives with the highest priority value are retained.
If no implementation is an alternative, all implementations are retained and are sorted in descending @Priority order (highest priority value comes first).
2.2.2. Customizing request cohort
Cohort is assigned by a io.quarkus.load.shedding.RequestClassifier.
There is 128 statically defined cohorts, with the lowest number being 1 and highest number being 128.
The classifier should return a number in this interval; if it does not, the number is adjusted automatically.
There is one default classifier which assigns a cohort based on a hash of the remote IP address and current time, such that an IP address changes its cohort roughly every hour.
It declares no @Priority.
It is possible to define custom implementations of the RequestClassifier interface.
The implementations must be CDI beans, otherwise they are ignored.
The CDI rules of typesafe resolution must be followed.
That is, if multiple implementations exist with a different @Priority value and some of them are @Alternatives, only the alternatives with the highest priority value are retained.
If no implementation is an alternative, all implementations are retained and are sorted in descending @Priority order (highest priority value comes first).
3. Limitações
The load shedding extension currently only applies to HTTP requests, and is heavily skewed towards request/response network interactions. This means that gRPC, WebSocket and other kinds of streaming over HTTP are not supported. Other "entrypoints" to Quarkus applications, such as messaging, are not supported either.
Further, the load shedding implementation is currently rather basic and not heavily tested in production. Improvements may be necessary.
4. Configuration reference
Propriedade de Configuração Fixa no Momento da Compilação - Todas as outras propriedades de configuração podem ser sobrepostas em tempo de execução.
Configuration property |
Tipo |
Padrão |
|---|---|---|
Whether load shedding should be enabled. Currently, this only applies to incoming HTTP requests. Environment variable: Show more |
boolean |
|
The maximum number of concurrent requests allowed. Environment variable: Show more |
int |
|
The Environment variable: Show more |
int |
|
The Environment variable: Show more |
int |
|
The probe factor of the Vegas overload detection algorithm. Environment variable: Show more |
double |
|
The initial limit of concurrent requests allowed. Environment variable: Show more |
int |
|
Whether priority load shedding should be enabled. Environment variable: Show more |
boolean |
|
